Counterbalance Forklift
Blog
Use and Maintenance of Loaders
Jun 27 , 2025
Use and maintenance of loaders
1. Since construction machinery is a special vehicle, operators should receive training and guidance from the manufacturer, have a full understanding of the structure and performance of the machine, and gain certain operation and maintenance experience before operating the machine. The "Product Use and Maintenance Manual" provided by the manufacturer is an essential document for operators to operate the equipment. Before operating the loader, be sure to read the "Use and Maintenance Manual" first and perform operation and maintenance as required.
2. Pay attention to the workload of the front wheel loader during the running-in period. Half of the workload during the running-in period should not exceed 60% of the rated workload, and an appropriate workload should be arranged to prevent the occurrence of overheating caused by long-term continuous operation of the machine.
3. Pay attention to frequently observing the indications of each instrument. If an abnormality occurs, stop the machine in time to eliminate it. Stop the operation before the cause is found and the fault is eliminated.
4. Pay attention to frequently checking the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid, and fuel oil (water), and pay attention to checking the sealing of the whole machine. If too much oil and water are found during the inspection, the cause should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that grease should be added to the lubrication points every shift during the running-in period (except for special requirements).
5. Keep the machine clean, adjust and tighten loose parts in time to prevent loose parts from aggravating wear or loss of parts.
6. At the end of the running-in period, the machine should be maintained compulsorily, and inspection and adjustment should be done well, and attention should be paid to the replacement of oil.
In short, the requirements for the use and maintenance of the wheel loader machine during the running-in period can be summarized as: strengthen training, reduce load, pay attention to inspection, and strengthen lubrication. As long as you pay attention to and implement the maintenance and maintenance of the loader during the running-in period as required, you will reduce the occurrence of early failures, extend the service life and improve the operating efficiency, and the machine will bring you more benefits.

dejar un mensaje

dejar un mensaje

    Si Usted está interesado en nuestros productos y desea saber más detalles, deje un mensaje aquí, le responderemos tan pronto como nosotros .. puedamos.

Casa

Productos

Acerca de

contacto